• Compliance Lable

  • $20.00

  • Description

    Dear Customer:

    EPA COMPLIANCE LABLES


    Please e-mail sales@staintune.com.au with the below information.


    Thank you for choosing Australia’s “Pipes of Perfection”

    Current NSW EPA Legislation calls for the labeling of all aftermarket exhaust systems.
    99% of Staintune systems are compliant under the Stationary Noise Test i.e. Are under
    The legal requirement at the test RPM for the bike they are intended for.

    If you have received the label with this notice simply find a suitable location for the label.
    Labels must be placed on the Staintune product, the best place is the Staintune mounting bracket.
    In some cases there is not enough space on the muffler mount bracket to apply the label.
    If this is the case find a location as close to the Staintune Product as possible.

    Please Note: Do not place labels on the muffler body or inlet tubes or any other extreme heat area this will help prevent the labels adhesive from burning and falling off.

    Should you need a Label re- issued for yourself or a friend with a Staintune pipe you can
    Simply, Phone, fax, email or post your request, There is now a $20 fee for this service.

    Please provide the following info when ordering a replacement Compliance Label:


    Make…………………………..…Model….………………………..Year…………………

    Original Stationary test info off bikes Label! .Test RPM………………DBA………......

    Your Name……………………………………………….Phone no………………………..

    Address………………………………………..................City...............................................

    State …………Postcode………………Rego No……………Vin……………………..…..

    Purchased from…………………………………………………………………………..….

    Label Supplied with pipes Yes………. No……….

    IMPORTANT: Most Staintune Mufflers are only compliant with the restrictors supplied in place,
    Engine wear and induction system modifications may change the outcome of a stationary noise test.
    It is the users responsibility to maintain and keep the vehicles exhaust system in good working order.

    If you are at all concerned with the effectiveness of your silencing system please contact Staintune or your local EPA facility for Dba testing.

    • The noise level for motorcycles before March 1984 is 100 decibels.

    • For motorcycles built on or After 1 March 1984, and designed or manufactured for use on a road, the level is 94 decibels.

    • For vehicles certified to ADR 83/00 and with compliance plate dates of 1 September 2011 or earlier, the prescribed noise level is the higher of either the level in Schedule1 or the ADR 83/00 signature level plus 5 decibels.

    • For vehicles with compliance plate dates after 1 September 2011, the prescribed noise level is the ADR 83/00

    Thank you for choosing Australia’s “Pipes of Perfection”

    Current NSW EPA Legislation calls for the labeling of all aftermarket exhaust systems.
    99% of Staintune systems are compliant under the Stationary Noise Test i.e. Are under
    The legal requirement at the test RPM for the bike they are intended for.

    If you have received the label with this notice simply find a suitable location for the label.
    Labels must be placed on the Staintune product, the best place is the Staintune mounting bracket.
    In some cases there is not enough space on the muffler mount bracket to apply the label.
    If this is the case find a location as close to the Staintune Product as possible.

    Please Note: Do not place labels on the muffler body or inlet tubes or any other extreme heat area this will help prevent the labels adhesive from burning and falling off.

    Should you need a Label re- issued for yourself or a friend with a Staintune pipe you can
    Simply, Phone, fax, email or post your request, There is now a $20 fee for this service.

    Please provide the following info when ordering a replacement Compliance Label:


    Make…………………………..…Model….………………………..Year…………………

    Original Stationary test info off bikes Label! .Test RPM………………DBA………......

    Your Name……………………………………………….Phone no………………………..

    Address………………………………………..................City...............................................

    State …………Postcode………………Rego No……………Vin……………………..…..

    Purchased from…………………………………………………………………………..….

    Label Supplied with pipes Yes………. No……….

    Please e-mail sales@staintune.com.au with the above information.

    
    IMPORTANT: Most Staintune Mufflers are only compliant with the restrictors supplied in place,
    Engine wear and induction system modifications may change the outcome of a stationary noise test.
    It is the users responsibility to maintain and keep the vehicles exhaust system in good working order.

    If you are at all concerned with the effectiveness of your silencing system please contact Staintune or your local EPA facility for Dba testing.

    The noise level for motorcycles before March 1984 is 100 decibels.

    • For motorcycles built on or After 1 March 1984, and designed or manufactured for use on a road,
    the level is 94 decibels.

    • For vehicles certified to ADR 83/00 and with compliance plate dates of 1 September 2011 or earlier, the prescribed noise level is the higher of either the level in Schedule1 or the ADR 83/00 signature level plus 5 decibels.

    • For vehicles with compliance plate dates after 1 September 2011, the prescribed noise level is the
    ADR 83/00

Share this product